Description
Converter for 1x M.2 NVMe to PCIe x4 with heatsink and LED strip
- Supports M.2 sizes of 22×30/42/60/80 mm
- Passive cooling
- Blue LED strip
Â
Customisable
The IB-PCI214M2-HSL contains both a full and a half profile cover. This means that it can be used in almost any type of housing without any problems. In addition, M.2 SSDs with the dimensions of 22×30/42/60/80 mm can be installed. No matter what configuration you need, the IB-PCI214M2-HSL gives full throttle in any setting.
Â
Speed until the board glows
The current M.2 NVMe SSDs achieve more than five times the speed of traditional SATA SSDs. This enormous power naturally generates a lot of waste heat on the small M.2 cards. In order to protect the card and the system, the speed is throttled if the SSD heats up too much. The IB-PCI214M2-HSL offers enough cooling power with the enclosed heat conduction pads and the large heat sink so that you can enjoy the full power of your M.2 SSD at all times.
Â
Power and design
The massive heat sink is not only responsible for temperature control. The integrated acryl glass highlight is illuminated by LEDs and immerses the system in a rich blue tone.
Â
Description
Specification
- Type: M.2 Card
- Transfer Rate(s): Up to 64 Gbit/s
- Host Interface(s): PCIe 4.0 x4
- Internal Interfaces: M.2 PCIe NVMe (M-Key)
Backwards compatible with PCIe 3.0/2.0 - Compatability: Supports 2230/42/60/80 NVMe drives up to 2TB
- Additional Features: Blue LED Strip
Bus-powered
Passive cooling – aluminium heatsink - Dimensions: 16 x 115 x 60 mm
- Package Type: Retail
- Package Weight: 0.2600 kg
- Warranty: 2 Years
- #Hide#Host Interface: PCI Express