TELTONIKA RUT241 3G/4G Cat4 Industrial Cellular Router

Description

Teltonika RUT241 Industrial LTE Router – RUT241

The Teltonika RUT241 LTE Router is a tiny form factor, cost-effective, flexible and powerful LTE router aimed at industrial professional applications. The RUT241 the modified version of the best-selling RUT240 and inherits the industrial design, compact size, multiple interfaces, and RMS compatibility.

In order to offer exceptional connection continuity the RUT241 comes equipped with 4G LTE, Wi-Fi, and two Ethernet ports which can be configured together to provide a backup connection through automatic failover. Thanks to the to the digital inputs and outputs combined with advanced RutOS software the RUT241 can be used in scenarios where automation is required. Combining these features the RUT241 is an excellent solution for a variety if M2M and IoT applications and provides easy setup, reliable networking, and remote access.

Specifications

MOBILE

Mobile Module
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

Status
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

Black/White list
Opterator black/white list

Band management
Band lock, Used band status display

APN
Auto APN

Bridge
Direct connection (bridge) between mobile ISP and device on LAN

Passthrough
Router assigns its mobile WAN IP address to another device on LAN

Multiple PDN (optional)
Possibiity to use different PDNs for multiple network access services (not available in standard FW)

Wireless

Wireless Mode
IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi Security
WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client isolation

SSID
SSID stealth move and access control based on MAC address

WiFi users
Up to 50 simultaneous connections

Wireless Hotspot
Captive portal(Hotspot), internal/external Radius server, built-in customisable landing page

Ethernet

WAN
1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

Network

Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)

Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)

VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall
Port forward, traffic rules, custom rules

DHCP
Static and dynamic IP allocation, DHCP Relay, Relayd

QoS / Smart Queue Management
Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS
Supported >25 service providers, others can be configured manually

Network backup
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover

Load balancing
Balance your internet traffic over multiple WAN connections

SSHFS (optional
Possibility to mount remote file system via SSH protocol (not available in standard FW)

Security

Authetication
Pre-shared key, digital certificates, X.509 certificates

Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks

VLAN
Port and tag based VLAN separation

Mobile quota control
Set up custom data limits for the SIM card

WEB filter
Blacklist for blocking out unwnated websites, whitelist for specifying allowed sites only

Access control
Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN
Multiple clients and server can be running simultaneously, 12 encryption methods

OpenVPN Encryption
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256

GRE
GRE tunnel

PPTP,L2TP
Client/Server service can run simultaneously

Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code

SSTP
SSTP client instance support

ZeroTier
ZeroTier VPN

WireGuard
WireGuard VPN client and server support

MODBUS TCP Slave

ID filtering
Respond to one ID in range [1;255] or any

Allow Remote Access
Allow access through WAN

Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP Master

Supported functions
01, 02, 03, 04, 05, 06, 15, 16

Supported data formats
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS Data To Server
ProtocolHTTP(S), MQTT, Azure MQTT

MQTT Gateway
MQTT gatewayAllows sending commands and receiving data from MODBUS Master through MQTT broker

Monitoring and Management

WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log

FOTA
Firmware update from server, automatic notification

SSH
SSH(v1, v2)

SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call
Reboot, Status, Wifi on/off, Mobile data on/off, Output on/off

TR-069
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT
MQTT Broker, MQTT publisher

SNMP
SNMP (v1, v2, v3), SNMP trap

JSON-RPC
Management API over HTTP/HTTPS

MODBUS
MDBUS TCP status/control

RMS
Teltonika Remote Management System (RMS)

IoT Platforms

Cloud of Things
Allows monitoring of: Device data, Mobile data, Network Info, Availability

ThingWorx
Allows monitoring of:WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity
Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

Azure IoT Hub
Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to
Azure IoT Hub server

System Characteristics

CPU
Mediatek MIPS 24Kc 580 MHz

RAM
128 MB, DDR2

FLASH storage
16 MB, SPI Flash

Firmware/Configuration

WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

FOTA
Update FW/configuration from server

RMS
Update FW/configuration for multiple devices

Keep settings
Update FW without losing current configuration

Firmware Customisation

Operating System
RutIS (OpenWrt based Linux OS)

Supported languages
Busybox shell, Lua, C, C++

Development tools
SDK package with built environment provided

Input/Output

Input
1 x Digital input, 0 – 5 V detected as logic low, 8 – 30 V detected as logic high

Output
1 x Digital open collector output, max output 30 V, 300 mA

Events
SMS, Email, RMS

Power

Connector
4 pin industrial DC power socket

Input voltage range
9 – 30 VDC, reverse polarity protection, surge protection >33 VDC 10us max

PoE (passive)
Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt

Physical Interfaces (Ports, LEDs, Antenna, Buttons, SIM)

Ethernet
2 x RJ45 ports, 10/100 Mbps

I/O’s
1x Digital input, 1x Digital Output on 4 pin power connector

Status LEDs
3x Connection type status LEDs, 5x Connection strength LEDs, 2x LAN status LEDs, 1x Power LED

SIM
1x SIM slot (Mini SIM -2FF), 1.8V/3V, external SIM holder

Power
1x 4 pin DC connector

Antennas
2x SMA for LTE, 1x RP-SMA for WiFi antenna connectors

Reset
Reboot/FActory reset button

Physical Specification

Casing Material
Aluminium housing with DIN rail mounting option, plastic panels

Dimensions (W x H x D)
83 x 25 x 74 mm

Weight
125g

Mounting options
Bottom and sideways DIN rail mounting slots

Operating Environment

Operating temperature
-40°C to 75°C

Operating humidity
10% to 90% non-condensing

Ingress protection rating
IP30

Regulartory and Type Approvals

Regulatory
CE/RED, UKCA, CB

EMI Immunity

Standards
EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 Final draft EN 301 489-52 V1.2.0 EN 55032:2015+A1:2020 EN 55035:2017+A11:2020 EN 61000-3-3:2013+A1:2019 EN IEC 61000-3-2:2019

ESD
EN 61000-4-2:2009

Radiated Immunity
EN 61000-4-3:2020

EFT
EN 61000-4-4:2012

Surge Immunity (AC Mains Power Port)
EN 61000-4-5:2014+A1:2017

Conducted Immunity
EN 61000-4-6:2014

DIP
EN IEC 61000-4-11:2020

RF

Standards
EN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1

Safety

Standards
EN IEC 62311:2020, EN 50665:2017, EN IEC 62368-1:2020+A11:2020, IEC 62368-1:2018

Package Contents
Router RUT241
9W UK PSU
2 x LTE antennas (swivel, SMA male)
1 x WiFi antenna (swivel, RP-SMA male)
Ethernet cable (1.5 m)
SIM Adapter Kit
QSG (Quick Start Guide)